Advanced Power Technologies’ Transformer Temperature Probe or Resistance Temperature Detector (RTD), TTC-PROBE comes in a range of types for multiple uses related to Transformer Temperature Monitoring. All TTC-PROBEs never requires calibration when used along with our Electronic Temperature Monitors, Total ECLIPSE, ECLIPSE and TTC-1000. Cost effective and highly accurate RTD Probes manufactured and made to order directly in house at our factory located in New Jersey.
Transformer Temperature Probe Part Numbers:
TTC-PROBE-00-XXX: Ambient Temperature Probe
TTC-PROBE-01-XXX: Universal Well Probe with Snap Elbow
TTC-PROBE-02-XXX: Magnetic Surface Mount Probe
TTC-PROBE-05-XXX: Thermowell temperature probe with elbow, 7/8-UNF fitting and 0.481 sleeve
TTC-PROBE-11-XXX: Flexible Conduit Ready Universal Thermal Well Probe
TTC-PROBE-12-XXX: Liquid Tight Conduit Ready ANSI Thermal Well Probe
Probes can be supplied from lengths of 10 to 250 feet, represented as the final three digits of the part number (-XXX).
Download our TTC-PROBE Model Option Table here to easily find the correct part number based on your requirements.
Our Ambient Temperature Probe, TTC-PROBE-00 is available for monitoring the ambient temperature of the air surrounding the transformer. Each TTC-PROBE-00 includes two mounting clamps for securing the probe in the recommended position underneath the TTC-1000 or ECLIPSE cabinet which provides protection from the elements as well as allows the probe to not be affected by direct sunlight to ensure accurate readings.
Universal Thermowell Probe type TTC-PROBE-11. RTD probe with liquid-tight ready fitting. Allows coupling of flexible conduit directly to the thermometer well adapter fittings provided. Universal thermowell probe suitable for thermometer well diameters of 0.375”, 0.500”, 0.625” and 0.700”. Probe assembly comes with multiple probe sleeve OD: 0.481”, 0.625” and 0.675” and three thermometer well adapter fittings: 7/8-UNF (ANSI/IEEE C57 thermometer well), ½-NPT and ¾-NPT.
Universal Thermowell Probe type TTC-PROBE-01. RTD probe with a snap elbow. Universal thermowell probe suitable for thermometer well diameters of 0.375”, 0.500”, 0.625” and 0.700”. Probe assembly comes with multiple probe sleeve OD: 0.481”, 0.625” and 0.675” and three thermometer well adapter fittings: 7/8-UNF (ANSI/IEEE C57 thermometer well), ½-NPT and ¾-NPT.
A Magnetic Mount Probe, TTC-PROBE-02 is available for surface mounting to the load tap changer (LTC) or transformer tank wall when a thermowell is unavailable. See Figure 1.1 below.
Thermowell Temperature Probe with Snap Elbow, TTC-PROBE-05. RTD probe suitable for ANSI C57 thermowell. It comes with 0.481-inch probe sleeve.
Liquid Tight Conduit Ready ANSI Thermal Well Probe, TTC-PROBE-12. RTD probe which allows coupling of flexible conduit directly to the thermometer well adapter fittings provided. Suitable for ANSI C57 thermowell, and it comes with a 0.481-inch probe sleeve.
Our Transformer Temperature probes are interchangeable and do not require calibration.
The Transformer temperature probes and measurement circuitry are intrinsically accurate to the stated accuracy specification. The probe leads are connected to a plugin Phoenix type compression style terminal blocks. The terminal blocks are supplied with each unit and plugs into RTD probe inputs.
Download TTC-PROBE Connection Drawings Below: